More information

Download our Flexiteek brochure here
This brochure provides more information on Flexiteek material, including decking, top rails and hand rails.

FAQ about Flexiteek
If you have questions about Flexiteek, click the above link – there's a good chance of finding the right answer. Naturally, you may also contact us by e-mail or phone.

Flexiteek installation video
The following video demonstrates how to install Flexiteek yourself. You may also order made-to-measure panels. Although they cost more, they reduce the installation effort.

Play installation video

Products

Back to Flexiteek starting page

WDK 100
This standard profile has a width of 50 mm and is available in sets of two planks with a length of 2.25 m or in rolls with a length of 10 m. Nine profiles with a length 2.25 m cover an area of 1 m², and a 10-m roll covers an area of 0.5 m². This profile gives you a black dividing line between the planks (caulking effect).

WDK 100 W
This standard profile has a width of 50 mm and is available in sets of two planks with a length of 2.25 m or in rolls with a length of 10 m. Nine profiles with a length 2.25 m cover an area of 1 m², and a 10-m roll covers an area of 0.5 m². This profile gives you a cream dividing line between the planks (caulking effect).

WDK 101
This standard profile has a width of 50 mm and is available in sets of two planks with a length of 2.25 m or in rolls with a length of 10 m. Nine profiles with a length 2.25 m cover an area of 1 m², and a 10-m roll covers an area of 0.5 m². This profile is coming without dividing lines

WDK 102
This profile has a rounded edge, which makes it ideal for finishing the edge of the deck. It is available in two sizes: 2.25-m planks and 10-m rolls. A 10-m roll covers an area of 0.5 m². This profile gives you a black dividing line between the planks (caulking effect).

WDK 102 W
This profile has a rounded edge, which makes it ideal for finishing the edge of the deck. It is available in two sizes: 2.25-m planks and 10-m rolls. A 10-m roll covers an area of 0.5 m². This profile gives you a cream dividing line between the planks (caulking effect).

WDK 103
This profile has a rounded edge, which makes it ideal for finishing the edge of the deck. It is available in two sizes: 2.25-m planks and 10-m rolls. A 10-m roll covers an area of 0.5 m². This profile is coming without dividing lines

WDK 104
J profile, width 70 mm, specifically intended for finishing stairs and other locations where an overhang is necessary. This profile has a black edge boundary. A white edge can be obtained by cutting off the black edge and separating the profiles with item WDK 107 W. Length 2.25 m.

WDK 105
This 70-mm profile has a rounded edge, which makes it ideal for finishing the edge of the deck. Available in 2.25-m planks or 10-m rolls. A 10-m roll covers an area of 0.7 m². This profile gives you a black dividing line between the planks (caulking effect).

WDK 106
A broad king plank (width 125 mm) intended to used as a centre plank where the other profiles meet, such as on the foredeck, or for finishing windows and hatches. This profile does not have a dividing line. It is available in lengths of 2.25 m or in 10-m rolls.

WDK 107
Black T profile with a width of 5 mm; replaces the conventional black silicone rubber caulking between adjacent planks. This option provides uniform spacing between the profiles and creates a much nicer appearance. It is available in lengths of 1 m or in 10-m rolls.

WDK 107 W
Cream T profile with a width of 5 mm; replaces the conventional black silicone rubber caulking between adjacent planks. This option provides uniform spacing between the profiles and creates a much nicer appearance. It is available in lengths of 1 m or in 10-m rolls.

WDK 108
This profile has a width of 150 mm and the same appearance as three WDK 100 profiles side by side. It can be used to reduce installation time on large areas. It has three black dividing lines and fits seamlessly with the other profiles. It is available in lengths of 2.25 m and in 10-m rolls. 10 running metres cover an area of 1.5 m².

WDK 108 W
This profile has a width of 150 mm and the same appearance as three WDK 100 profiles side by side. It can be used to reduce installation time on large areas. It has three cream dividing lines and fits seamlessly with the other profiles. It is available in lengths of 2.25 m and in 10-m rolls. 10 running metres cover an area of 1.5 m².

WDK 109
This standard profile has a width of 70 mm and is available in two lengths: 2.25 m planks or 10-m rolls. Nine profiles with a length 2.25 m cover an area of 1 m², and a 10-m roll covers an area of 0.7 m². This profile gives you a black dividing line between the planks (caulking effect).

WDK 110
This standard profile has a width of 70 mm and is available in two lengths: 2.25 m planks or 10-m rolls. Nine profiles with a length 2.25 m cover an area of 1 m², and a 10-m roll covers an area of 0.7 m². This profile is coming without dividing lines

WDK 111
This 45-mm profile has a rounded edge, which makes it ideal for finishing the edge of the deck. The back edge does not have a groove; this profile is therefore intended to be fitted against upright edges or in combination with item WDK-107. There is no dividing line on this profile. It is available in 10-m rolls.

WDK 112
This broad plank with a width of 125 mm does not have any T grooves on the bottom. It can be used in places where the ends of the profile are visible. It is also often used for finishing hatches and for fashioning difficult shapes. This profile is available as planks with a length of 2.25 m.

WDK 113
This profile is suitable for finishing roof windows, stairs, and other locations where a massive teak appearance is desirable. It is usually fitted vertically. The profile is supplied unfinished and must be sanded to obtain the typical teak look. Available only in lengths of 5 m.

WDK 114
This standard profile is supplied without a tongue-and-groove joint but is otherwise the same as item WDK-100. This plank has the familiar black dividing line and can therefore be integrated seamlessly. It is available by the metre or in 10-m rolls. 20 running metres of profile are required to cover an area of 1 m².

WDK 115
Black T profile with a width of 5 mm. Primarily used a spacer in combination with conventional silicone-like substances. This profile ensures that all planks are spaced equally. The profile is just 3 mm high to leave room for joint caulking. Available in 10-m rolls.

Nidra delivers worldwide – visit our webshop